Salt Finish Concrete: This procedure gives a rough subtle texture and skid resistance to plain or coloured concrete. Flights of Stairs Meaning: a stairway (set of steps) between one floor or landing and the next. How Many Feet Is a Queen Size Bed: Standard queen bed dimensions are 60 inches by 80 inches, or 5 feet by 6 feet, 8 inches. As this refers to the dimensions of the mattress itself, you can estimate an additional 2 to 5 inches for the extra bulk of the frame. Concrete Mix Ratio: There is no particular ratio of sand, stone, and cement in the standard code to be used in the construction of the flyover bridges Bridge Piers: A bridge pier is a type of structure that extend to the ground below or into the water. It is used to support bridge superstructure and transfer the loads to the foundation. Fence Post Spacing Chart: Dig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide). What Is Slab: A concrete slab is a common structural element of modern buildings, consisting of a flat, horizontal surface made of cast concrete.  Flemish Bond: A masonry bond in which each course consists of headers and stretchers alternately so laid as to always break joints. Mortar Vs Concrete: While concrete is made of cement, water, sand, and gravel mixed in different proportions, mortar consists of cement, water, and lime aggregate. Modulus of Rupture: You can calculate the modulus of rupture, "sigma," using the equation σr = 3Fx/yz2 for the load force F and size dimensions in three directions,. Tie Beam: A horizontal beam that serves to prevent two other structural members from Timber Vs Lumber: Also known as timber, is wood that has been processed into beams and planks, a stage in the process of wood production.  Dynamic Vs Kinematic Viscosity: Usually, it is measured in centipoise (cP). Kinematic viscosity is expressed as the ratio of fluid dynamic viscosity to its density. Oblique Projection: Oblique projection is a simple type of technical drawing of graphical projection used for producing two-dimensional images of three-dimensional objects.

Forum Role: Participant

Topics Started: 0

Replies Created: 0